Smart Digital Multimeter MS8301D
Digital smart device for measurement of AC / DC voltage, resistance, frequency and continuity.
Presentation
The Mastech MS830D is an innovative multimeter with Smart feature that benefits from the services so it can be used easily and comfortably without any knowledge of electronics and electrical engineering. This compact multimeter automatically detects AC / DC voltage, resistivity and continuity by visualizing the measured values of a large dual display. This is an ideal tool for home-made craftsmen, amateurs and electricians
Briefly about the product
MS8301D
2x1.5V AAA
150x74x48mm
220 g
CE / ETL / RoHS
CAT III 600V
Accessories included
Test Leads
Battery and User's manual
Certificates
Range of measurements
Specifications
Range
Resolution
Accuracy
DC Voltage
6V/60V/600V
0.01V/0.1V/1V
±(0.5%+3)
AC Voltage
6V/60V/600V
0.01V/0.1V/1V
±(0.8%+5)
Resistance
2kΩ/20kΩ/200kΩ/2MΩ
10MΩ
10MΩ
0.001kΩ/0.01kΩ/0.1kΩ/0.001MΩ
0.01MΩ
0.01MΩ
±(0.8%+3)
±(1.0%+5)
±(1.0%+5)
Frequency
60Hz/600Hz/3kHz
0.1Hz/1Hz/10Hz
±(1.0%+5)
Duty Cycle
10%～90%
1%
±2.0%
Features
Display
Counts
6000
Autoranging
Auto
APO
Auto Power Off
Continuity Buzzer
<40Ω
Data Hold
Yes
NCV
Non-Contact Voltage Detector
MAX / MIN
Yes
LBD
Low Battery Display
Double Display
Yes
Display Backlight
Yes
Applicability
- Simultaneously display multiple parameters
- Easy to use hobby
- Automatic recognition of the measured parameters
- With the device easy and contactless, you find voltage
- For precise and accurate measurement of values
Working specifications
Buzzer
In electronics, a continuity test is the checking of an electric circuit to see if current flows . A continuity test is performed by placing a small voltage across the chosen path. If electron flow is inhibited by broken conductors, damaged components, or excessive resistance, the circuit is "open".
Autoranging
Automatic switching of a multirange meter from its lowest to the next higher range, with the switching process repeated until a range is reached for which the full-scale value is not exceeded. Automatic switching of a multirange meter from its lowest to the next higher range, with the switching process repeated until a range is reached for which the full-scale value is not exceeded.
Auto Power Off
Auto Power Off function shutting down the device after a certain inactivity time.
Display Backlight
Rear screen illumination is an important advantage for any device that owns it. Thanks to it, the visibility and legibility of the screen is increased, thus the device is much more subtle and reliable in small ambient light and long-term use.
Duty Cycle
Duty cycle is the proportion of time during which a component, device, or system is operated. The duty cycle can be expressed as a ratio or as a percentage. Suppose a disk drive operates for 1 second, then is shut off for 99 seconds, then is run for 1 second again, and so on. The drive runs for one out of 100 seconds or 1/100 of the time, and its duty cycle is therefore 1/100, or 1 percent.
Low Battery
The indication for low battery level is a useful feature and alert the user when needed battery unit to be changed. So you will still have a functioning device for use.
Data Hold
Data hold function is useful when measurements occur. So when pressing the "HOLD" button you will hold the display information.
NCV
Non contact voltage, NCV tester is a useful tool for any kind of electrical work - there is no quicker or simpler way to safely check for electrical current in a wire, outlet, switch or an old lamp that has mysteriously stopped working.
Smart
Automatic detection and visualization of dimensions such as: AC / DC voltage, resistance, continuity, etc.
Brochures and instructions