Smart Digital Clamp Meter MS2033A
Digital clamp meter for intelligent measurement of current in electrical installations.
Presentation
MS2033A is an innovative Clamp Meter with the Smart function which allows users to operate in convenient without electrical acknowledge. While in operation, it detects the object in AC/DC voltage, Current, resistance, continuity, with Dual display fully automatically. Also, Features flexibility manual operation functions for the user who are in the expert electrical field. It is a perfect tool for household, hobbyists, and electricians.
Briefly about the product
MS2033A
3x1.5V AAA
204x78x43mm
195 g
CE / ETL / RoHS
CAT III 600V
Accessories included
Test Leads
Battery and User's manual
Certificates
Range of measurements
Specifications
Range
Resolution
Accuracy
DC Voltage
6V/60V/600V
0.01V/0.1V/1V
±(0.5%+3)
AC Voltage
6V/60V/600V
0.01V/0.1V/1V
±(0.8%+5)
AC Current
2A/20A/200A
600A
600A
0.01A/0.01A/0.1A
1A
1A
±(2.5%+8)
±(3.0%+10)
±(3.0%+10)
Resistance
2kΩ/20kΩ/200kΩ/2MΩ
10MΩ
10MΩ
0.001kΩ/0.01kΩ/0.1kΩ/0.001MΩ
0.01MΩ
0.01MΩ
±(0.8%+3)
±(1.0%+5)
±(1.0%+5)
Frequency (Clamp)
60Hz/600Hz/3kHz
0.1Hz/1Hz/10Hz
±(1.0%+5)
Frequency (Plug)
60Hz/600Hz/3kHz
0.1Hz/1Hz/10Hz
±(1.0%+5)
Duty Cycle
10%～90%
1%
±2.0%
Features
Display
counts
6000
Jaw Opening
Ø26mm
Autoranging
Auto Power Off
Yes
APO
Auto Power Off
Yes
Continuity Buzzer
<40Ω
Yes
A Hold
Data Auto Hold
Yes
MAX / MIN
Yes
LBD
Low Battery Display
Yes
Double Display
Yes
Display Backlight
Yes
Applicability
- To measure running current for operating loads
- In an industrial environment
- For measuring electrical installations
- Suitable for mobile, repair teams
- For hobby projects
Working specifications
AC Current
An electric current is a flow of electric charge. The common symbol for current is the uppercase letter I. The SI unit for measuring an electric current is the ampere(A), which is the flow of electric charge across a surface at the rate of one coulomb per second. The particles that carry the charge in an electric current are called charge carriers.
Resistance (R)
Resistance is the opposition that a substance offers to the flow of electric current. It is represented by the uppercase letter R. The standard unit of resistance is the ohm(Ω)
Buzzer
In electronics, a continuity test is the checking of an electric circuit to see if current flows . A continuity test is performed by placing a small voltage across the chosen path. If electron flow is inhibited by broken conductors, damaged components, or excessive resistance, the circuit is "open".
Autoranging
Automatic switching of a multirange meter from its lowest to the next higher range, with the switching process repeated until a range is reached for which the full-scale value is not exceeded. Automatic switching of a multirange meter from its lowest to the next higher range, with the switching process repeated until a range is reached for which the full-scale value is not exceeded.
Auto Power Off
Auto Power Off function shutting down the device after a certain inactivity time.
Display Backlight
Rear screen illumination is an important advantage for any device that owns it. Thanks to it, the visibility and legibility of the screen is increased, thus the device is much more subtle and reliable in small ambient light and long-term use.
Duty Cycle
Duty cycle is the proportion of time during which a component, device, or system is operated. The duty cycle can be expressed as a ratio or as a percentage. Suppose a disk drive operates for 1 second, then is shut off for 99 seconds, then is run for 1 second again, and so on. The drive runs for one out of 100 seconds or 1/100 of the time, and its duty cycle is therefore 1/100, or 1 percent.
Low Battery
The indication for low battery level is a useful feature and alert the user when needed battery unit to be changed. So you will still have a functioning device for use.
Data Hold
Data hold function is useful when measurements occur. So when pressing the "HOLD" button you will hold the display information.
Smart
Automatic detection and visualization of dimensions such as: AC / DC voltage, resistance, continuity, etc.
MAX/MIN
Press the MAX/MIN key to show the maxinum reading value among measuring data, and the “MAX”symbol appears on the display. Press the button again, the “MIN” symbol appears on the display and will show the minimum reading value among measuring data, press the button again to return to normal mode.
Brochures and instructions
Accessories
