Vikiwat LTD - official representative of Mastech for Bulgaria
en
BGN
0
Cart
Your cart is empty
0

Digital AC Clamp Meter MS2009A

Amplifiers for Voltage Measurement, AC Current and Resistance.
BGN59.00 VAT Incl
Product code: MS2009A
Warranty: 24 months
Presentation
Excellent ergonomics make the MS2009A an amazingly one of the best tools for locating malfunctions in industrial and domestic environments. This multifunction device offers a wide range of voltage, AC current and resistance.
Briefly about the product
MS2009A
3x1.5V AAA
218x78x35mm
239 g
CE / ETL / RoHS
CAT III 600V
Accessories included
Test Leads
Carry bag
Battery and User's manual
Certificates
CAT III 600V CE certification ETL certicfication RoHS
Range of measurements
Specifications
Range
Resolution
Accuracy
DC Voltage
200mV/2V/20V/200V
600V
0.1mV/0.001V/0.01V/0.1V
1V
±(0.6%+3)
±(0.8%+3)
AC Voltage
200mV
2V/20V/200V
600V
0.1mV
0.001V/0.01V/0.1V
1V
±(2.0%+3)
±(0.8%+5)
±(1.0%+5)
AC Current
2A/20A/200A/600A
0.001A/0.01A/0.1A/1A
±(2.0%+5)
Resistance
200Ω/2kΩ/20kΩ/200kΩ/2MΩ
20MΩ
0.1Ω/0.001kΩ/0.01kΩ/0.1kΩ/1kΩ
0.01MΩ
±(0.8%+4)
±(1.2%+5)
Features
Display
Counts
2000
Jaw Opening
Ф26mm
Autoranging
Auto and Manual
Yes
APO
Auto Power Off
Yes
Diode
Open Voltage
1.5V
Continuity Buzzer
<60Ω
Data Hold
Yes
NCV
Non-Contact Voltage Detector
Yes
MAX
Yes
Work Light
Yes
LBD
Low Battery Display
Yes
Applicability
  • To measure the current flowing with working loads
  • Suitable for mobile repair teams
  • For realization of hobby projects
Working specifications
AC Current
An electric current is a flow of electric charge. The common symbol for current is the uppercase letter I. The SI unit for measuring an electric current is the ampere(A), which is the flow of electric charge across a surface at the rate of one coulomb per second. The particles that carry the charge in an electric current are called charge carriers.
Resistance (R)
Resistance is the opposition that a substance offers to the flow of electric current. It is represented by the uppercase letter R. The standard unit of resistance is the ohm(Ω)
Buzzer
In electronics, a continuity test is the checking of an electric circuit to see if current flows . A continuity test is performed by placing a small voltage across the chosen path. If electron flow is inhibited by broken conductors, damaged components, or excessive resistance, the circuit is "open".
Diode
A diode is a specialized electronic component with two electrodes called the anode and the cathode. Most diodes are made with semiconductor materials such as silicon, germanium, or selenium. The fundamental property of a diode is its tendency to conduct electric current in only one direction. When the cathode is negatively charged relative to the anode at a voltage greater than a certain minimum called forward breakover, then current flows through the diode. If the cathode is positive with respect to the anode, is at the same voltage as the anode, or is negative by an amount less than the forward breakover voltage, then the diode does not conduct current. This is a simplistic view, but is true for diodes operating as rectifiers, switches, and limiters. The forward breakover voltage is approximately six tenths of a volt (0.6 V) for silicon devices, 0.3 V for germanium devices, and 1 V for selenium devices.
Autoranging
Automatic switching of a multirange meter from its lowest to the next higher range, with the switching process repeated until a range is reached for which the full-scale value is not exceeded. Automatic switching of a multirange meter from its lowest to the next higher range, with the switching process repeated until a range is reached for which the full-scale value is not exceeded.
Auto Power Off
Auto Power Off function shutting down the device after a certain inactivity time.
Display Backlight
Rear screen illumination is an important advantage for any device that owns it. Thanks to it, the visibility and legibility of the screen is increased, thus the device is much more subtle and reliable in small ambient light and long-term use.
Low Battery
The indication for low battery level is a useful feature and alert the user when needed battery unit to be changed. So you will still have a functioning device for use.
Data Hold
Data hold function is useful when measurements occur. So when pressing the "HOLD" button you will hold the display information.
Maximum Measurement
The "MAX" function shows the highest value reached during the measurement.
NCV
Non contact voltage, NCV tester is a useful tool for any kind of electrical work - there is no quicker or simpler way to safely check for electrical current in a wire, outlet, switch or an old lamp that has mysteriously stopped working.
Work Light
Integrated work light, which provides extra convenience when working in environments with insufficient ambient light.
Brochures and instructions
Accessories
We use cookies to improve your work with our site. By using this site, you agree to our terms and conditions I agree